CemeSeal logo
CemeSeal

Our Products

Two products engineered to work together. CEMESEAL 360 preps the surface. CemeSeal transforms it permanently.

Core Product

CemeSeal

The Permanent Sub-Surface Waterproofing Barrier

How It Works in Concrete

CemeSeal penetrates up to 2 inches internally into concrete capillaries, reacting with free lime (Calcium Hydroxide) to create Calcium Silicate Hydrate (CSH) — the exact same mineral that gives concrete its structural strength. It fills microscopic voids, hardens the surface, stops dust, blocks water intrusion permanently, and prevents saltwater spalling.

How It Works in Wood

Wood is made of hollow organic tubes called tracheids. CemeSeal fills those hollow tubes, reacting with CO₂ in the air to precipitate into solid, microscopic glass particles. This mineralizes the organic cellulose, turning it into a petrified wood-stone composite that insects cannot eat and water cannot rot.

Three Pillars of Protection

Permanent Water Protection
Blocks structural moisture absorption. Silica crystalline glass locks out water permanently.
Organism Defense
Mineralizes cellulose, removing the food source for termites, powderpost beetles, and fungal rot. A permanent, non-toxic mechanical barrier.
Class A Fire Retardant
Acts as a heat shield, forces carbon char formation, slows flame spread. Never marketed as "fireproof" — classified as highly fire-resistant.
CemeSeal Concrete Treatment product label — penetrating concrete sealer and hardener, ASTM C-67 and C-666 certified
CemeSeal Wood Treatment product label — penetrating wood preservative and hardener

Technical Specifications

Coverage:
150–350 sq ft per gallon
Application:
Brush, roller, or spray on clean dry surface
Drying Time:
2–4 hours normal penetration
Foot Traffic:
30 minutes
Penetration:
Up to 2 inches into capillaries
VOC Content:
Zero-VOC
Appearance:
Clear / invisible, water-based
Odor:
Odorless

Applications

Office Buildings Warehouses Residential & Commercial Water Control Grain Silos Subway Tunnels Sewage Treatment Airports Parking Garages Docks & Piers Marine Environments Pool Shells
Natural wood versus mineralized wood cross-section showing silica-filled tracheid tubes that block moisture and termites
CemeSeal concrete reaction infographic showing how it converts free lime into dense Calcium Silicate Hydrate

Real Results — Before & After

One permanent application transforms both concrete and wood — protected side shown against untreated.

CemeSeal-treated concrete driveway beading water next to an untreated section
Concrete Driveway
CemeSeal-treated wood deck with rich restored tone next to weathered untreated boards
Wood Deck
360 Degreaser Cleaner product label with dilution guide, application instructions, and safety information
360 Degreaser Cleaner brochure detailing powerful performance, safe and sustainable properties, and applications
Surface Prep

CEMESEAL 360 Cleaner Degreaser

Eco-Friendly, Biodegradable Surface Cleaner & Degreaser

What Makes It Different

CEMESEAL 360 uses a specialized, non-toxic sodium metasilicate and organic surfactant chassis — no sodium hydroxide (lye). It breaks down subsurface oils, mold, and environmental scale at high pH while remaining entirely safe for wood lignin. It opens natural capillary pores without bleaching fibers, warping boards, or causing fuzzy degradation.

Safe & Sustainable

  • 100% VOC-free, biodegradable
  • Water-based, non-flammable
  • Safe for landscaping, turf, and waterways
  • No sodium hydroxide / lye
  • No hazardous material handling required

Applications

Manufacturing Floors Commercial Kitchens Automotive Shops Warehouses Wood Decks Driveways Pool Shells Equipment Cleaning Parts Washing General Maintenance